Interfit Electronics

Accessories

	Item No	Description
	INT410	Flashmeter
	INT410 Flashmeter Offers great value for money incident & reflected meter readings in 1/3rd increments.Uses a single 9V MN1604 Battery.

	Item No	Description
	INT411	Infra red transmitter
	INT411 IRX MKII infra red trigger Suitable for most cameras(except Sony or Minolta) operates up to 10 mtrs Uses AA cell Batteries. with a new power indicator dial to show when the unit is turned on or off.

Interfit single channel radio transmitter INT412

Specifically designed for all Interfit Flash systems. Powered by twin “AAA” battery cell in the receiver and a long life MN21 / 23AE 12volt battery.

Radio System range up to 50 mtrs. Kit includes both mini jack and standard jack and Camera sync leads. Both the Receiver and Transmitter have power switches to conserve batteries when not in use. LED Lamp confirmation of a system signal for use up to 1/125 with a focal plane shutter or 1/500 with a leaf shutter.

Please note the INT412R RECEIVER is available to work with this kit, However it can not be used with the INT492 or INT492R as they are on different frequencies

Hot shoe and Strobe Flash trigger set ( 4 channel)

Ideal for mounting hotshoe flashguns on to light stands. This hotshoe and strobe radio trigger set can be used for both applications and trigger most hotshoe units and all Interfit strobes.

Hotshoe flash guns can be mounted directly on to the built in hotshoe which also provides the triggering power to the flashgun, whilst studio strobes are connected via the provided P.C.Sync terminal on the side of the receiver.

With the additional use of 4 channels to choose from you can use it when other photographers are using radio transmitters but still be able to control your units independently from the other photographers. The unit is powered by long life batteries and works on 433MHz at a distance of up to 30m (100 feet) in an open area.

This product will not work with INT412 due to variances in frequencies.

Hot shoe and Strobe Flash receiver ( 4 channel) ONLY

Ideal for adding an additional receiver to other flashguns or strobes when using Infrared sync cells would not be of use over long distances or in daylight conditions.

By adding the receiver to another flash on the same channel you can control your lighting to the full. Identical to the receiver in the INT492 trigger set except without the transmitter. Supplied with P.C.Sync cable and batteries.

This product will not work with INT412 due to variances in frequencies.

Delta Remote For Nikon Cameras

The Nikon Delta remote is a hotshoe fitting radio shutter release with LED confirmation for Auto Focus, Single / Bulb or Continuous frame rate operations.

Ideal for sport or wildlife photographers to enable the camera to be placed in a remote location and operated up to 100 mtrs (320 feet) away from the camera.

For use with the following cameras via the included cables.

The STR123 can be used with Nikon, Kodak & Fuji cameras with the included cables including the following cameras:

Nikon D70s / D80
Nikon N90s / F5 /F6/ F100 /F90 F90x
Nikon D1 / D1h / D1 x / D2h/ D2x/ D2hs/ D2xs/ D3 /D3s / D200 /D300 / D300s / D700
Kodak DSC-14n
Fuji S3 Pro / S5 Pro
Nikon D90/ D5000

Download operating instructions here

Delta Remote For Canon Cameras

The Canon Delta remote is a hotshoe fitting radio shutter release with LED confirmation for Auto Focus, Single / Bulb or Continuous frame rate operations.

Ideal for sport or wildlife photographers to enable the camera to be placed in a remote location and operated up to 100 mtrs (320 feet) away from the camera.

For use with the following cameras via the included cables.

The STR124 can be used with Canon cameras with the included cables including the following cameras:

Canon EOS 30/ 33 / 50 / 300 / 300d / 350d / 400d / 450d / 500d / 1000d
Canon Rebel XS / Rebel / Rebel XT / Rebel XTI / Rebel XSI / Rebel T1I
Canon EOS 1v3 / 1ds / 1ds mk ii mk iii /1ds mk iii
Canon 10d / 20d / 30d / 40d /50d /5d /5dmkII

Download operating instructions here

i SYNC 4 Wireless and Optical receiver only

The I Sync 4 has 4 independent radio channels for use where multiple photographers may be using wireless triggers such as at a wedding etc. Now you can set the channel and still keep on shooting without interference from other photographers.

A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering.

Optical triggering is similar to your in built sync cell on your studio flash heads and can allow a greater distance to be used when using Infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells.

Wireless triggering when used with the radio trigger on your camera allows out of sight flash triggering or around walls and most obstacles up to a maximum distance of 30 mtrs (100 feet).

Each receiver has a built in light stand tread on the bottom to allow your speedlite to be stand mounted. In addition a PC sync cable and socket is included along with a mono jack converter to fit both large and small jack sync sockets for connecting to studio lighting. Runs on long life lithium batteries (included).

i SYNC 4 Wireless and Optical Trigger kit

A major benefit of the receivers is the ability to switch between optical triggering or wireless triggering.

Optical triggering is similar to your in built sync cell on your studio flash heads and can allow a greater distance to be used when using Infrared triggers such as the Interfit INT411 or receiving white light from a second head. Ideal for extending the range where the flash may not be received by your in built sync cells.

Wireless triggering when used with the radio trigger in this kit on your camera allows out of sight flash triggering or around walls and most obstacles up to a maximum distance of 30 mtrs (100 feet).

Multi-fit TTL Cord for Nikon , Fuji and Canon cameras

Using an innovative pin configuration the Multi-fit TTL cord can be used with Nikon, Fuji and Canon cameras when used with manufacturer’s flashguns.

The TTL cord allows you to maintain a link to your flashgun for lighting off camera.

The cord is 740mm (29”) when folded and can be used up to 2 mtrs (6 feet) away with a screw thread built in it can be mounted on to a light stand to hold your flashgun.

In addition you can fire two flashguns on the same cord in manual mode.

10 Mtr (32 feet)Multi-fit TTL Cord for Nikon , Fuji and Canon cameras

Using an innovative pin configuration the Multi-fit TTL cord can be used with Nikon, Fuji and Canon cameras when used with manufacturer’s flashguns.

The TTL cord allows you to maintain a link to your flashgun for lighting off camera.

The cord is 10m (32') Ideal for using a secondary flashgun connected to your camera as a master unit to control your Remote units at a greater distance with a screw thread built in it can be mounted on to a light stand to hold your flashgun.

In addition you can fire two flashguns on the same cord in manual mode.

Interfit Lamps

Item no

Description

For Product Fitting

INT032

Tungsten P21/ES 500 watt

Tungsten White head (INT100/INT105)

Ez lite, Stellar tungsten, SXT3200

You can also use the INT500 250 watt lamp as an alternative in any of these units.

INT033

Fluorescent 24 watt bulb

NOW DISCONTINUED USE INT034

Cool-lite (INT103) & Prolite 3,5,9 and Super Cool-lite Ranges

INT034

Fluorescent 28 watt bulb

Cool-lite (INT103) & Prolite 3,5,9 and Super Cool-lite Ranges

INT035

Halogen 650 watt bulb

Halogen heads (Pro 700/INT102 1300 x 2)

INT036

Halogen 1000 watt

HL1000 / Pro 1000/ Pro 1200

INT038

100 watt Tungsten Lamp

EX150 "MKII" only

INT040

150 watt Fluorescent Lamp

Monstar Only

INT041

55 watt Fluorescent Lamp

Super Cool-lite 55 watt units only can not be used in any other units

INT042

32 watt Tungsten Lamp

Super Cool-lite 4,5,6,9

INT328

Halogen 500 watt

Solarlite only

INT329

Halogen 1000 watt

Standard solarlite

INT331

55 watt Fluorescent Lamp

CoolTUBZ 4

INT332

55 watt Fluorescent Lamp

CoolTUBZ 6

INT498

100 watt Upgrade Tungsten

EX150 MKI & EXD200 only

INT499

150 watt Tungsten

Stellar 150/300

Colorflash 150/250/300

EX300 / EXD400

INT500

250 watt Tungsten

Stellar 600/1000

Colorflash 500/1000

Alternative lower wattage for the following units only to replace the INT032 lamp

Ez lite, Stellar tungsten, SXT3200

INT515

60 watt Tungsten

STD EX150 MKI/EXD200

Item no	Description	Size
CIA330	Sync lead	3m (10')
Replacement Sync lead with PC Connector at one end to connect to your camera and standard mono jack to connect to Interfit and most other makes of flash heads. LARGE JACK

Small Jack Sync Leed	Item no	Description	Size
	CIA332	Sync lead	4m (12')
	Replacement Sync lead with PC Connector at one end to connect to your camera and standard mini jack to connect to Interfit and most other makes of flash heads. SMALL JACK

IMPORTANT NOTE : Images and colour's used on this site are for illustration purposes only and should not be relied upon to accurately represent actual products. Differences in colour/shade are impossible to prevent using current internet/computer technology.

Expanding your creativity with