Folding Softbox 40 x 40 cm (16x16")

The STROBIES folding softbox is ideal for mobile photographers wanting a quick and portable solution to studio lighting on the move. Simply fit your flashgun into the provided shoe with the head inserted inside the softbox to provide a softer quality of light. Ideal for wedding and event or outdoor photographers. Each Kit is supplied with a ball bracket to allow the softbox to be tilted in multiple directions, and a handy all in one kit bag for simple storage of the kit. Fits directly on to a standard light stand such as a COR750 or COR751 or can be used with the new Strobies Boom Arm INT333 for over head lighting and combined with a reflector to create beautiful quality portraits.

In addition a SB900 shoe is included within the kit to allow the use of the Nikon SB900 speedlite which does not have a standard foot.

Please note some flashguns such as large headed units like the Vivitar 285 do not fit inside the opening and should not be used, here we recommend using a Flex Mount and the Strobies Softbox (STR104 ) as an alternative.

INT337
 
 

a

Beauty Dish ADAPTOR KIT

For use with INT334 Softbox and Bracket

This Beauty Dish adaptor kits is designed to be used with the INT334 bracket (above) with the softbox removed or with a separately supplied STR157.

The kit includes the 30cm (12") Beauty dish and an adaptor ring to enable it to fit over the 15cm (6") ring of the bracket

Can be used with other manufacturers products of a similar design with a 15cm aperture ring.

(Please note bracket is not supplied but available separately as STR157).

Kit contents are shown in the red square.

Ideal for using above the subject and used in conjunction with the INT333 Boom arm VAL/VAB.

Please also see the XL series of brackets HERE

Please note this Beauty dish can not be fitted to a Strobies flex mount

 

INT337

a

Boom Arm VAL/VAB

The Strobies Boom Arm allows an assistant to hold your lighting above the subject. Each Arm has a padded grip and a cover at the base for a comfortable and strong grip. The arm has 3 telescopic joints for extended use above the subject. Ideal for use with Strobies XS brackets, Triple Flash Brackets, Strobies Pop up Softboxes, Strobies Radio sets with Strobies accessories attached such as a softbox or beauty dish.

 

INT337
Min length
66 cm
26"
Section one Length added
114 cm
45"
Section two Length added
162 cm
63"
Max length (fully extended)
210 cm
82"

a

All Metal Umbrella Bracket

 

Strobies high quality all metal professional umbrella brackets

Designed to be versatile for professional photographers these all metal flashgun and umbrella holders allow 1 or 2 flashguns to be used or a combination of a flashgun and radio receiver in the other shoe mount.

Using the same shoe mount available on the Strobies XS Brackets, with large thumbscrews enables you to adjust your flashguns even with gloves on. With spring loaded handles the brackets will stay in place without dropping, so you can always be confident that your lighting will stay in the position you placed it in. Can be used with most sizes and types of umbrellas with 7 or 8mm shafts.

Please note: Flashguns, Umbrellas and Lighting Stands are not included, we recommend COR751 stands for indoor and COR752 / COR753 for outdoor work.

 

INT337

a

Trishoe adaptor bracket and kit

 

Strobies Trishoe and bracket kit

Enables two flashguns and a radio trigger or three flashguns to be mounted on the provided umbrella holder and stand mount.

a

a

Three Way flash Bracket

The STROBIES Triple flash bracket has been designed with ease of use in mind, in a compact yet strong and versatile kit, ideal for the mobile studio set ups for all sports, wedding or event, and portrait photographers. The bracket has 3 flash shoe mounts and a tilt handle to enable the perfect positioning of your lighting. this will be of interest to Sports photographers when using an additional INT333 Strobies boom arm you can have an assistant follow the action whilst panning high actions images, wedding photographers can hold the lighting high above a group to remove shadows in the background. Event Photographers can use the bracket to obtain control in smaller location shoots where mains power may not be available.

INT337
Titan Pro transceiver

titan pro

PLEASE NOTE TITAN PRO

IS NOT AVAILABE IN THE USA

 

Welcome to the world of professional radio transceivers, a combined transmitter and receiver in one unit. The Titan Pro can trigger compatible cameras and keep the camera in a wake status, allowing the option for the camera to placed in position before the event. With the availability of four channels, photographers can trigger four different cameras or flashguns up to a range of 100 meters (320ft) from the main camera position.

Additional cables are required to connect to compatible cameras to trigger the shutter or studio strobes. Additionally you can trigger flashguns attached to the in built hotshoe without an extra cable.

Please note that Titan Pro will only be available in European countries Titan Pro is not available in the USA

 

Shutter release cables are shown below for Nikon, Canon and Sony cameras.

a
 
Titan Pro Shutter release cables
 
a

These high quality shutter release cables enable the use of two or more compatible cameras to be fired in synchronization with the Titan Pro transceivers attached, ideal for wildlife, studio and sports photographers needing to catch the action from different angles at the same time.

Each cable is 60 cm (24" ) long to enable the trigger to be placed near to the camera position. Available to fit the following camera manufacturers, Nikon , Canon and Sony.

 

item number

Cable fitting

Camera fitting

a
a
Nikon D70s/D80 Digital Camera
a
a
Nikon N90s/F5/F6/F100/F90/F90X D1/D1H/D1X/D2H/D2Hs/
D2X/D2XsD3/D3x/D3s/D200/D300/D300s/D700
Kodak DSC-14N/Fuji S3 Pro/Fuji S5 Pro
a
a
Nikon D90 / D5000
a
a

Canon EOS 30/33/50/300/300D

(Digital rebel)/350D(Rebel XT)/400D(Rebel)/450D(Rebel XSi)/500D(Rebel T1i) 1000D (Rebel XS)

a
a
Canon EOS 1V/3/1D/1Ds/1DS Mark II/1Ds Mark III/1D Mark II/1Ds
Mark III 10D/20D/30D/40D/50D/5D/5DMkII
a
a
Sony A100/A200/A300/A350/A700, Minolta 5D/7D
 
a
Titan Pro Stand Jacket
 
a

The Titan Pro stand jacket enables you to mount a Titan Pro transceiver to a light stand, boom arm tripod , monopod or even the power cable to a studio strobe for easy and convenient fixing close to the flash.

It is simply attached by a small screw on the back of the jacket then the elastic cord drawn around and clipped over the unit for a safe and secure fixing.

 

Stellar X
These units offer a convenient yet economical method of modern studio lighting, suitable for use with conventional still digital or video cameras. They provide a soft uniform diffused light. Ideal for portraits in a larger area then the SC 5 or SC9 ideal for larger web based product photography, Portraits in medium sized studios or larger living spaces.

For your convenience we offer a twin head kit (INT219) which features 2 softboxes and 2 high contrast reflectors with diffuser panels and 2 large lighting stands.

You will find the versatility of the kit useful for most types and styles of photography. The Super Cool-lite 655 head uses near daylight (5200k) balanced fluorescent lamps equivalent to 1320 watts of tungsten lighting per head for excellent quality results.

These units offer the same benefits as the Super Cool-lite 9 heads and kits but with the added advantage of additional power from the 6 x 55 watt lamps.

a
Super cool lite 655
Controls
a
a

Super cool lite 655

High contrast reflector

Super cool lite 655

Octobox

a
Item no  
Description
Size
INT269
Large Flat Panel Reflector
89x178cm (35x70")

The Interfit studio flat panel kit is an indispensable reflector with a large Gold or Silver surface which is ideal for full length fashion or portrait shoots. Ideally suited when working with just one or two lights in a variety of ways. The Reflector comes complete with stand and a special rotating and tilting bracket which allows the reflector to be used in either vertical or horizontal mode.

Can also be mounted on a COR757 Boom arm.
 

 
a
a
a
Item no  
Description
Size
INT271
Large Flat Panel Reflector
89x178cm (35x70")

The Interfit studio flat panel kit is an indispensable reflector with a large White or Black surface which is ideal for full length fashion or portrait shoots. Ideally suited when working with just one or two lights in a variety of ways. The Reflector comes complete with stand and a special rotating and tilting bracket which allows the reflector to be used in either vertical or horizontal mode.

Can also be mounted on a COR757 Boom arm.
 

a
 

IMPORTANT NOTE : Images and colour's used on this site are for illustration purposes only and should not be relied upon to accurately represent actual products. Differences in colour/shade are impossible to prevent using current internet/computer technology.

Expanding your creativity with