Please note: Kits do not include cameras or flashguns
Flex Mounts are available to fit the following flashguns (Please note all flex mounts are supplied BLACK in colour)
 
SGM100 Nikon SB600 / SB800
SGM200 Sony F32X / Canon 430EXMK1
SGM300 Sony F56AM / Nikon SB26/27/28
SGM400 Canon 580EX / 550EX
SGM500 Vivitar 285 HV
SGM600 Nikon SB900
SGM700 Canon 580EXMKII

Please see table below on additional fittings for the above Flex Mounts.

Otherwise take your flashgun to a stockist and try each of the above Flex Mounts, it needs to be a tight fit in order to hold the components in place without slipping off the flashgun.

Weights Kg Lbs/ozs
  0.08 0.2
Flexible rubber and plastic

 
Early reports indicate that the following flex mount may be fitted to the following flashguns, however we would prefer you try one for yourself as this info is yet to be confirmed yet by Interfit.
NOTES
(*1)
(*SOME SPACE TOP/BOTTOM BUT FITS WELL ON THE SIDES)
 
#
 CONFIRMED FITTING BY INTERFIT
Item no
Flashgun head size
Additional fittings
SGM100
68 x 35 mm
OLYMPUS FL36 #, Nikon SB80DX
SGM200
63 x 42 mm
METZ 36 AF4N#, METZ 40 AF4N#, METZ 44 AF4C#, METZ 48 AF1#, METZ 54 AF1C#, SUNPAK 4000AF#, SUNPAK 888F2 THYRISTER#, SONY HVL F 42 AM#. Leica SF58 # Jessops 360AFD# , Vivitar DF400MZ # Olympus FL-50R
SGM300
60 x 40 mm
Nikon SB28DX, Yongnou YN-468
SGM400
70 x 42 mm
Sony HVL-F58AM, Olympus FL-50 (without wireless functions)
SGM500
78 x 55 mm
 
SGM600
70 x 48 mm
Sigma EF-530 DG ST #, Sigma EF 530 DG Super # ,NISSIN  DI866#, Pentax AF 540 FGZ
SGM700
67 x 45 mm
Bower SFD35C, NISSAN DI622#, SIGMA EF430 (*1), SIGMA EF 500 DGST#,Sunpak 444D

Measure your flash gun across the front face at the widest points, then check the above measurements to see which one is likely to be closest to your flashgun.

Remember you need to have a tight fit.

If you have tried a flex mount please let us know so we can let other customers know

Please send the info to the

webmaster@interfitphotographic.com

Unfortunately we will not be able to reply but we do thank you in advance for the information.

Flex Mounts available to fit
Flex Mounts

Fitting a Flex Mount could not be simpler.

The flex Mount is correctly fitted when the the flash gun cannot be pushed any further inside the flex mount and is flush with the central hole of the Flex Mount. Colour gels may be fitted inside the Flex Mount including manufacture’s “white balance filters”.

You do not need to use any glue, rubber bands or velcro
when using a Strobies Flex Mount. In the image on the right you can clearly see the front mounting clips for use with Strobies products, these allow you to change from a Beauty Dish to a Snoot in seconds.

Flex Mount Softbox Mounting holes

On each edge of the Flex mount you will see 4 holes for
mounting a Strobies softbox,(as shown with the rods inserted). It is best to erect the softbox without the flex mount being on the flashgun to prevent any damage to the Flash gun or the material of the softbox.

Please note White flex mounts used for display only all flex mounts are supplied in BLACK)

Click image below to download a PDF file of the "Store fittings guide"

IMPORTANT NOTE : Images and colour's used on this site are for illustration purposes only and should not be relied upon to accurately represent actual products. Differences in colour/shade are impossible to prevent using current internet/computer technology.