The Strobies XS is unique way to hold your flash gun and use it with a softbox, a large beauty dish or with almost any any other "S" type fitting accessories available. However a 7" reflector (as shown bottom image) is included with every XS bracket allowing you to add further accessories etc.

One of the major benefits of the XS Bracket is its ability to rotate it's hotshoe mount to enable your iTTL or eTTL port to be visible to your Infrared triggering system such as an SU800,STE-2 or control / trigger flashgun.

In addition to the rotating hotshoe we have built in a second hotshoe to hold a radio receiver or a second flash gun should you desire to use the Strobies XS to hold an Umbrella in the light stand fitting provided. The strobies xs bracket is fully compatible with the Nikon SB900 latest show mount.

Using 2 flashguns will effectively double your output, a major benefit of this is reducing your recycling time and preserving your batteries to enable longer usage times.

A wide range of accessories are available to fit the Strobies XS brackets "S" type bayonet fitting, including the following items:

Beauty Dishes ( RF5000)

Softboxes (Any Pro range or Stellar Softbox up to 1 mtr)

Snoots (RF5006 or INT209)

Honeycombs AH6020,AH6030,AH6060 these fit directly into the included 7" reflector. You can also add the Stellar range of Barndoor's (RB4001) and the Colour gel set (AC8011) allowing you to add spot colour to your backgrounds.

Interfit Umbrellas can also be fitted to the XS bracket via the light stand mounting bracket. When used with the standard reflector the light will fill the umbrella in a similar way as using a standard flash head .

Look out for this logo for compatible products on our website.

This Strobies XS Softbox Kit consists of:

1 x Strobies XS Bracket

1 x 7" reflector

1 x Softbox 40 cm x 40 cm (16" x 16")

1 x Lighting stand (COR751) Air damped

The new “S” Type bracket kits allows you to connect your Hotshoe flashgun to almost any “S” type fitting  light shaping tools such as softboxes, beauty dishes, snoots, barndoor sets and spill kill reflectors etc. One of the main benefits of the STROBIES XS is its rotating hotshoe mount, which allows your iTTL or eTTL port to be seen on the same side as your camera and flash triggering system (Nikon SU800 / Canon ST-E2). This allows for a greater range of the infrared triggering system with the above units or main flashgun as it no longer has to rely on walls or other objects to bounce the infrared signal back to the unit.

The STROBIES XS bracket also features an additional hotshoe for mounting a radio receiver for full manual control of your lighting system or a second flash unit should you use the bracket as an umbrella holder via the light stand mount which also has the facility to tilt backwards and forwards for perfect positioning.

Please note some original packaging may say that this kit contains a bag, PLEASE NOTE the INT327 does not contain a bag in this kit.

This Strobies XS Kit consists of:

1 x Strobies XS Bracket

1 x Lighting stand (COR751) Air damped

1 x RF5000 "S" type Beauty Dish 41cm (16")

The new “S” Type bracket kits allows you to connect your Hotshoe flashgun to almost any “S” type fitting  light shaping tools such as softboxes, beauty dishes, snoots, barndoor sets and spill kill reflectors etc. One of the main benefits of the STROBIES XS is its rotating hotshoe mount, which allows your iTTL or eTTL port to be seen on the same side as your camera and flash triggering system (Nikon SU800 / Canon ST-E2). This allows for a greater range of the infrared triggering system with the above units or main flashgun as it no longer has to rely on walls or other objects to bounce the infrared signal back to the unit.

The STROBIES XS bracket also features an additional hotshoe for mounting a radio receiver for full manual control of your lighting system or a second flash unit should you use the bracket as an umbrella holder via the light stand mount which also has the facility to tilt backwards and forwards for perfect positioning.

Please note some original packaging may say that this kit contains a bag, PLEASE NOTE the INT327BD kit does not contain a bag.